Answer this Question (1 Answer)

• 

  Chris at eSpares says...

  You haven't given any model number but this information but the following should give a guide. Remove the oven from its housing and disconnect the supply after switching off. Remove the rear control cover (and cabinet top if required). The timer is likely to be fitted in a short bracket fixed to the front panel with typicaly four screw. Once released photo the connections and push the retaining 'lugs' in to allow the timer to push out of the bracket. Now transfer each wire from the old timer to the new (note: some connectors have small catches that need to be depressed before releasing). Refit the new timer into the bracket and then the facia. Refit screws and covers before reconnecting and installing into the housing. Set clock to turn off automatic function or oven may not start.