HOW DO YOU FIT A 1200 WATT DRYER ELEMENT TO A HOTPOINT WDD960
Answer this Question (2 Answers)
- FIRSTY ISOLATE THE MACHINE The element on the WDD960 is located in the top of the machine, Undo the 2 screws securing the lid to the dryer and slide back and off, You will see the element housing, Undo the 7 smaller Torx screws and prise the top away (carefully as there are wires connected) next dissconnect the element cables (Pink & blue wires). Undo the 2 brass nuts and remove the element, Just reverse the proccess to refit.
-
Rory at eSpares says...
Hi there, the element is situated at the rear of the dryer. First you'll need to unscrew and remove all clips from the protruding cover on the back panel of the dryer. You should then see a metal fan as well as another cover. The element it situated underneath this cover. Remove it, and uncouple the old element from all the wires and fittings. Then reverse the process to fit the new one. Check out this video for help: http://www.espares.co.uk/advice/tumble-dryers/a/9/1284/how-to-fix-a-dryer-thats-not-heating-up-hotpo.html. The dryer in the video is a lot more basic than yours, but hopefully the process involved should help you understand your dryer a little better.
Washing Machine Heater Element - 1200W Stock Number: ES215164
Genuine spare part for select models of Ariston, Hotpoint and Indesit washing machines
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices