Answer this Question (2 Answers)

• Did this today. Remove 4screws on lhs burner section, two on rh burner tray. Remove 4 screws at back to loosen the rear vent. Remove the rhs edge strip. Remove the screws on top and below securing the front panel, remove knobs and the front strip comes off. Remove the galv plate securing the clock in place. Take a pic and pull wires off .. Refit reverse of this .. Took around an hour. By Wattsvilleboy - Neath South Wales - 14 October 2013
• Turn off electricity also gas as precaution. Instructions included within how to use booklet. Need to remove both top burner sections. Four screws int left top tray. two in right hand section. Remove the four screwsthat secure top burner trays to oven flue grill from the back. These are difficult to find and need magnetic screw driver to hold screws when refitting. Righthand top burner section can now slide to the right approx 30mm. Remove the four screws that hold face panel both fro below (by oven doors) and four screws now accessable below top burner trays. The timer is located within galvanised steel plate secured by one screw. Disconnect electrical spade connectors noting colour / locations. Refit is reverse of this. Takes approx 30 - 45 minutes overall. By BigBoy - Hornchurch - 01 May 2012