Washing Machine Heater Element - 1950W Stock Number: ES1075038
Genuine spare part for select AEG, Electrolux, and Zanussi washing machines
Manufactured by Electrolux
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Heater Element - 1950W
If your washing machine isn't heating the water as well as it should be, perhaps your heater element is causing the problem. If so, we could have the part for you!
The function of the wash element is to heat the water to the washing temperature selected, but if the element fails it will mean the water will not heat up as required – and will result in your clothes not being washed as clean as usual.
With this genuine replacement heating element, your washer dryer could be performing back at its best in getting your clothes clean to the usual standards again.
Specifications:
- Wattage: 1950W
- Voltage: 230V
- Contains NTC Sensor Thermistor
- Single Tag Type
- Earth Tag
- Full length of element: 265mm
- Length of element to bracket: 230mm
- Width of element: 65mm
- Length of element to tubliar bend: 177mm
Genuine spare part for select AEG, Electrolux, and Zanussi washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
2 Questions and 2 Answers
-
eSpares Staff at eSpares says...
The element does come with the NTC included as shown in the photos.
I have checked the heater element and get electrical continuity but there is another connection on the face plate, I assume that it is a thermistor but I do not get any continuity. Is this correct. If it needs the control board then the price will right the machine off.
-
Chris at eSpares says...
The grey connector to the one side of the heater in a NTC temperature sensor and will have a higher resistance of typically between 2000 and 4000 ohms so will not show on the low resistance range of a meter.
Will this part fit my appliance?
Check Now
