Tumble Dryer Thermostat : ELTH TYPE 261/P 1266 39-20 Stock Number: ES131859
Genuine Spare Part for select Ariston, Creda, Crusader, Electra, General Electric, Hotpoint, Indesit, Jackson, Parnall and Proline tumble dryers
Manufactured by Hotpoint
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Front Thermostat
If your tumble dryer is blowing out cold air, you may have a faulty thermostat on your hands. If so, this spare could be just what you're after to have your tumble dryer working like new again. Once fitted in place of the faulty thermostat, you'll be back on track to a fully working dryer.
This front thermostat is a genuine Hotpoint spare part and will fit select models of Ariston, Creda, Crusader, Electra, General Electric, Hotpoint, Indesit, Jackson, Parnall and Proline tumble dryers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
9 Questions and 8 Answers
Hi, I tested the two rear thermostats and heating element on my tcr13 but still not heating. Can you please tell me where this front thermostat is located on the tcr13 1 Answer
-
eSpares Staff at eSpares says...
The front thermostat is located in the volute section of the dryer at the front of the machine.
hi i have changed both heating element and back thermostats started heating up but now nothing do i need to replace the front thermostat if it as one thank you
-
Chris at eSpares says...
Yes that would be the next to check. It is usually mounted just inside above the door opening on the drum support. Open and look upwards to unscrew it.
I know where to find the heater and the 2 stats above it but where and what is the 'front thermostat'. Could that be why my machine won't heat up. Should I replace all three, i.e. heater, 2 stats above it and the 'front' one, too? Can't find a video for replacing the front one.
-
Chris at eSpares says...
The front thermostat Stock Number: ES131859 is fitted above the door at the front in the plastic moulding that supportd the front of the drum. It is not clear on the exploded diagram but many of these type of thermostats are fitted from inside the drum by unscrewing the two fixings screws and lowering into the drum to disconnect.
I can find the 2 thermostats (ES487865) at the rear of the machine but I keep seeing reference to a front thermostat (ES131859) on the drum, which I can't locate. My Crusader's serial number is 57100269.
-
Chris at eSpares says...
If your date code is less than 65 you need Stock Number: ES551252 If your date code is more than 64 you need Stock Number: ES487865 These are normally mounted on a bracket directly above the heater element at the back under the heater cover.
all the filters are clean and the water tank is empty
-
Chris at eSpares says...
when it stops check the pump has been emptying the reservoir at the back. If the float switch sticks or is raised it will turn off the heating to prevent flooding.
Will this part fit my appliance?
Check Now
