Dishwasher Water Flow Meter with PCB Stock Number: ES1562739
Genuine spare part for select models of Beko, Flavel, Lamona, Maytag, Belling, Whirlpool and Zanussi dishwashers
Manufactured by Beko
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Dishwasher Water Flow Meter with PCB
If you're in need of a new water flow meter for your dishwasher, then you've come to the right place.
This genuine replacement water flow meter could be just what you need to resolve the problems you're having with your dishwasher and ensure that it is restored back to full working function once more.
Specification:
- Comes with PCB
Genuine spare part for select models of Beko, Flavel, Lamona, Maytag, Belling, Whirlpool and Zanussi dishwashers.
before rodering, please check the model fit list to ensure this part is suitable for your appliance.
9 Questions and 9 Answers
-
eSpares Staff at eSpares says...
The main PCB controls the amount of water required, the flow meter counts how much water is entering the dishwasher so the PCB no when to shut off the water valve and start washing the dishes.
Then empties and then keeps refilling until it floods the sump. I dried it all out and tried again. same thing only I turned machine off after about 50mins as water had reached the door seal. I turned off machine and pumped it out, only then did the machine beep and shut down. Prior to this the machine filled and stood idle, so I disconnected the flow switch and blew through and the wash began. all good until the above began. Could it be a faulty flow switch something else?
-
eSpares Staff at eSpares says...
You will need to check the pressure switch and chamber for a blockage before suspecting anything else.
-
eSpares Staff at eSpares says...
Yes, this part does connect to the regeneration unit.
Hi I have a Beko DWD4311W and after the program has finished there is a very small trickle of water coming in throught in fill point inside. 1 Answer
this is enough that over night it floods my kitchen. is this the flow meter? if not what part would it be? Many Thanks
-
eSpares Staff at eSpares says...
It is likely to be the inlet valve letting in water.
Lights go on - select program- makes whirring noise, empties but keeps whirring. Does not fill or wash
-
eSpares Staff at eSpares says...
If the dishwasher has not filled correctly it will not wash, please check out our helpful video www.youtube.com/watch?v=jLyA-7SC9ZY&t just copy and paste into your browser.
Will this part fit my appliance?
Check Now
