Get The App From Play Store!

Skip to main content

Washing Machine User Interface Module Stock Number: ES1771192

Genuine spare part for select models of Hoover washing machines

Read more

Manufactured by Hoover

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Washing Machine User Interface Module

If your washing machine is showing error codes and refusing to select certain wash cycles, it may be time to replace your electronic board. Once fitted to your appliance you should be able to select the wash cycle you require and get your washer back to its original best!

Genuine spare part for select models of Hoover washing machines. 

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Ask a Question

5 Questions and 5 Answers

Hi I've replaced ntc and iv tested heating element with multi meter and that seems fine But water still not heating up will this fix it? Thanks

By David Sitton - harwich - 16 January 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    Check for any signs of damage on the main control board, you are unable to test it so you will need to eliminate everything else before deciding it is the board.

Answer this question

Hi, I have a wdxce4852-80 washer dryer - pls can I check this is the right part,programmed for this machine? The fault I have is that none of the rapid wash or rapid w&d programs will start when I press the start button. Other programs start first time. Is there anything else I should be checking?...

By Matthew Saxon - - 10 September 2018
  • Parminder from eSpares
    Parminder at eSpares says...

    Please view our advice centre page which will give you more information on diagnosing faults relating to control and programming problems: www.espares.co.uk/advice/careandmaintenance/how-to-diagnose-washing-machine-control-and-program-problems

Answer this question
By P.B - Hampshire - 16 December 2017
  • Chris from eSpares
    Chris at eSpares says...

    If moving the selector knob slightly shows the problem replacing the switch should resolve the issue.

Answer this question

The model number of the machine is model DXC C483

By MW - South Shields - 13 December 2017
  • Chris from eSpares
    Chris at eSpares says...

    This is the control PCB not the power module that may be faulty. Please check your model number to ensure the correct part for the module.

Answer this question
By Alison Kelly - Hull - 25 October 2017
  • Parminder from eSpares
    Parminder at eSpares says...

    We can confirm this module is pre-programmed.

Answer this question

Will this part fit my appliance?

Check Now

Washing Machine User Interface Module

£79.32
(inc. VAT)
£79.32