Hotspot Fireplace Cleaner - 500ml

This 500ml fireplace cleaner from Hotspot is really effective for removing smoke, soot and tar stains caused by wood, coal and gas fires, from brick, stone, concrete, marble and many other hard surfaces.

• Capacity: 500ml
• Cleans right down to the pores
• Made in the UK
• Fast acting
• Covers 10–20 sq. metres per litre depending on the condition of the surface to be cleaned

Please Note: Do not use Hotspot fireplace cleaner on any decorated or painted stone or slate. This is corrosive and causes burns. Keep out of reach of children.

Directions for use:

• Ensure surface to be cleaned is cool.
• Remove screens, fixtures etc and protect floors and carpets.
• Wear protective gloves and clothing.
• Wet the area to be cleaned with plenty of water.
• Pour Hotspot fireplace cleaner onto a cloth and apply to the surface.
• Leave for approximately one minute and then rub vigorously with a damp cloth. Rough textured or pock-marked surfaces will require brushing, with an old nail brush.
• Rinse area thoroughly with water. Remove surface water with an absorbent cloth.
• If stubborn stains remain, repeat treatment.