Tumble Dryer Heater Element - 2500W Stock Number: ES543678
Genuine spare part suitable for select models of Hotpoint, Indesit and Ariston tumble dryers
Manufactured by Indesit
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Heater Element - 2500W
If you have come to notice your clothes are still damp after using your tumble dryer, eSpares could soon get your tumble dryer back to its full working performance. A faulty element will impact on how dry your clothes are during the cycle.
eSpares could soon help get your tumble dryer back to the appropriate heated temperature, with this replacement spare element. With the help of eSpares, you could soon be able to get your tumble dryer in full working order, so you will soon be back to dry clothes again in no time!
Specification:
- 2500watts
Genuine spare part suitable for select models of Hotpoint, Indesit and Ariston tumble dryers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
8 Questions and 8 Answers
I replaced the thermostats in June last year as it was not heating up and I had to do the same again in Feb this year. Those thermostats failed along with the element 10 days later so I replaced both thermostats and element. Both have failed again in just a few weeks. The multimeter reading on the element is over 80 so per your video that is too high and it has failed and the thermostats also seem to have failed. Is there something else I need to replace to stop these new parts from failing so quickly? Thanks.
-
Chris at eSpares says...
It may be possible to read the high heat and regular element is series and get a reading of 80 ohms so it suggests the element is OK. If you stop the machine mid cycle as the air flow stops immediately the thermostats can overheat and fail. Replace the thermostats and do not stop when hot but allow to finish the cycle with the cool down phase at the end.
The 4 elements & holders are rather fragile.
-
Chris at eSpares says...
All the elements are supplied in a single assembly on this dryer. See the additional images on the part.
My tumble dryer heats but just not as hot as it used to be do you think this is a faulty element 1 Answer
hotpoint TDC30P
-
Chris at eSpares says...
Check the airways and condenser are clear of fluff build up. If everything else is OK you may have a faulty element.
proline tdc6a condencer tumble dryer is blowing out cold air which part do i need?
-
eSparesMalindi at eSpares says...
We cannot give out technical advice unfortunately. Please consult a technician for help.
Will this part fit my appliance?
Check Now
