Get The App From Play Store!

Skip to main content

Fridge Thermostat - 077B6700 Stock Number: ES544115

Genuine spare part for select models of Bosch, Siemens and Balay fridge freezers

Read more

Manufactured by Bosch

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Fridge Thermostat

A fridge thermostat maintains the desired temperature by switching the cooling device on and off. If you’ve noticed the food in your fridge freezer is getting frozen or spoilt too early, then you might have a faulty thermostat. Maintain your fridge at the correct temperature with this replacement from eSpares and preserve your food for when you need it the most.

Specification:

  • Type: Danfoss 077B6700
  • Voltage: 250v

Genuine spare part for select models of Bosch, Siemens and Balay fridge freezers.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

This is Bosch spares reference: 170459

Ask a Question

5 Questions and 4 Answers

Bosch Fridge KTl15420GB/01 I got the thermostat from you. I have removed the temperature dial and the nut around the spindle and the retaining screw under a cap but the casing is still attached to the side of the fridge about two-thirds of the way along towards the light bulb and I just cannot figure out how to remove it or what is holding it there. I don't suppose one of you guys knows do they please?

By Steve - Stevenage, Herts - 09 August 2017
  • Chris from eSpares
    Chris at eSpares says...

    Once the screw is removed the housing should move, often the housing needs to be carefully pulled towards the front and it will release from the liner.

Answer this question

I have removed the dial and lock nut. There are no screws. Siemens fridge KU15RA40GB/03

By Eric - Telford - 11 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    On the front of the housing there may be a decorative 'strip' that can be taken off. check if there is a hidden screw that releases the thermostat housing. Once removed the housing should simply slide forward or backwards to unhook from the liner.

Answer this question

I have a Siemens KI24RA40GB/0i integrated fridge in my kitchen but it is struggling to get to the right temperature when I turn it to a lower temperature.If I push the super button it will go down to 4c at the back of the fridge but it goes up when the super switches off, so I was wondering if I could replace the thermostat or is there something else causing this such as a sensor or something else that isn't working. I would appreciate it if you could e mail me back if you may be able to help me with this problem.Kind regards Pete.

By Pete - Isle of Wight - 29 January 2014
  • Chris from eSpares
    Chris at eSpares says...

    The fact that the fridge only goes down to 4C when on super (normally bypassing the thermostat) suggests the problem is either due to low gas or a worn compressor (both would require a refrigeration systems engineer to resolve).

Answer this question

i have removed the screw under the cap but despite twisting, pulling,prising & pushing the cover will not come off. Model No. KTR1574/GB41.

By Frustrated - Lancaster - 03 February 2012
Answer this question

Will this part fit my appliance?

Check Now

Fridge Thermostat - 077B6700

£48.14
(inc. VAT)
£48.14