Single Hob Energy Regulator 40ER101C1P Stock Number: ES1562517
High quality replacement spare part for select models of Indesit, Zanussi, Tricity Bendix and Hotpoint cookers
at the moment the ring goes on and off but always on full power it wont turn down
-
Chris at eSpares says...
Yes it controls the power supplied to the rings, for more information see: http://www.espares.co.uk/advice/1/2082/how-to-diagnose-a-fault-with-an-electric-hob
- Will this simmerstat control the temperature of a 4ring electric cooker element of 1350watts 230v whose temperature reaches redhot
-
Chris at eSpares says...
Yes this is the part that regulates a ring. for more info see: http://www.espares.co.uk/advice/1/2082/how-to-diagnose-a-fault-with-an-electric-hob
the new spiral ring is on full power all the time and does not respond to the switch the old ring went out with a bang that blew the fuse,has that damaged the switch?regulator.the rest of the cooker works fine ,its an old belling radiant classic. thank you
-
eSpares Staff at eSpares says...
It is likely it damaged the switch when it went bang.
do i need two different parts
-
Chris at eSpares says...
For information on your repair see our video: How to diagnose problems with your oven: http://www.espares.co.uk/advice/1/2145 and How to diagnose a fault with an electric hob: http://www.espares.co.uk/advice/1/2082
Is this a replacement for Sunvic Simmerstat Type TYJ6202(01B), single ring controller on Creda Starlight please? 1 Answer
will your ES1562517 do it, or have you a better alternative. Physical size will be important
-
Chris at eSpares says...
This will probably be suitable but the connections may not match directly. Stock Number: ES866734 is listed as a direct equivalent or Stock Number: ES866734 as an alternative.
Number on my energy regulator is 42ER101C1 and printed below that is 46/99
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
I just replaced a faulty ceramic hob element (the element wire had blown and was broken) on my the tricity bendix SI453W. But now, with the replacement element installed, the element comes on immediatley on switching the cooker on at the wall socket ie. the control knob is still in the off position yet the element heats up and cannot be turned off except at the wall switch. Might this mean that the regulator is damaged as well? I will try the new element on another ring to see if it works as expected but I'd welcome your advice. thanks.
-
Chris at eSpares says...
Some times when a element blows the high current can cause the control contacts to 'weld' together. This is likely to have occurred and is why you cannot adjust or turn off this ring.
Will this part fit my appliance?
Check Now