Get The App From Play Store!

Skip to main content

Thermal Cut Out 100nc Stock Number: ES491201

Genuine spare part for select Ariston, Cannon, Creda, Hotpoint, Indesit, Jackson and Wrighton cookers

Product Q&A

Ask a Question

Hotpoint BD42 have changed the Thermostat but has not cured the problem

By Clive Antell - Sherborne - 10 December 2018
  • Parminder from eSpares
    Parminder at eSpares says...

    Please view our advice centre page which will give you more information on this matter, www.espares.co.uk/advice/symptom/cooker-or-oven-not-heating-up

Answer this question

i have noticed that the grill element has a small split on it and the bulb blew causing the switch to trip but cooker working normally other than that.

By paul cheadle - Stoke-on-Trent - 08 November 2018
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    You would need to test the thermal cut out with a multimeter to determine if it has failed.

Answer this question

My oven is integrated does it have to be removed from mounting

By Gaeme - L35 3JL - 19 December 2017
  • Chris from eSpares
    Chris at eSpares says...

    The oven has to be removed to access at the back as shown on the video now uploaded to this part.

Answer this question
By R B Milligan - Watford Hertfordshire - 07 June 2016
  • Chris from eSpares
    Chris at eSpares says...

    Many combination top ovens do as the oven thermostat will shut off if the cavity temperature exceeds 250C. Make sure the cavity is well ventilated and clean.

Answer this question
By GEM - RADSTOCK - 05 May 2016
  • Parminder from eSpares
    Parminder at eSpares says...

    Unfortunately we have not been provided with the rating that you require from the manufactures. This part will fit select models only, please be sure to check against the models this fits to ensure compatibility.

Answer this question
By M T - Northern Ireland - 07 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    If the circulation and cooling fans are working correctly and there is adequate air circulation then replacing this part may cure your problem.

Answer this question

Top oven was left on melting the door seal. The grill still works but the oven isn't heating up. Everything is fine with the main oven. Could it be that the thermal cut out needs replaced Any advice would be appreciated.

By Upshepops - Belfast - 02 December 2013
  • Chris from eSpares
    Chris at eSpares says...

    This thermal cut out is a 'link' that breaks if excess heat builds up and is likely to have gone open circuit. check with a meter for continuity and replace if it is 'open circuit'.

Answer this question

my indesit top oven element blew up, i have changed the element but now the grill function wont work, only the top oven, is this the "energy regulator"? im a qualified electrician so if further test need to be completed I will do so, I have only so for changed the element and haven't ripped it open yet!

By joehowarth93 - stockport - 27 November 2013
  • Chris from eSpares
    Chris at eSpares says...

    The cut out or the selector switch is likely to be faulty. Check when you have sorted out this fault that the main oven thermostat cuts out as if it has welded the contacts it may cause it to overheat and trip the cut out again.

Answer this question

Will this part fit my appliance?

Check Now

Thermal Cut Out 100nc

£19.40
(inc. VAT)
£19.40
× Basket
Your basket currently is empty
Continue Shopping