Tumble Dryer Timer Stock Number: ES802432
Genuine spare part for select models of Hotpoint and Indesit tumble dryers
Is there a wiring manual for this machine as I’m trying to replace the timer but can’t remember what wires go where 1 Answer
-
Parminder at eSpares says...
Sorry but eSpares does not have access to wiring diagrams.
Heater working but timer switch does not go round, it stays on the time selected., does the timer switch need replacing? 1 Answer
Heater not working. All else is working o.k. Have replaced the heater and sensors without success. Not sure where to go from there.
-
Chris at eSpares says...
There is another thermostat Stock Number: ES131859 that is mounted directly above the door opening just inside the drum. Open the door and look up to find it, remove the screws and carefully lower and disconnect to check it.
-
Chris at eSpares says...
Remove the top and remove the screws behind the bottle cover and at the top of the control panel then pull off the control knob to acces the timer screws.
I've taken the screws out at the back, but the top seems to be attached to the front facia. I cannot see any screws attaching it.
-
Chris at eSpares says...
Just thump the top front heavily with the heal of your hand to release the top as it slides back.
I have opened my machine up to replace things and have inadvertantly knock a black and white wire off, from the other end of the front thermostat. I think it goes to the timer, but not sure which terminal because there are 3 spare, could you please advise? A circuit diagram would be brilliant, or just the terminal position. Thanks in advance Chris James
-
Chris at eSpares says...
We believe this wire is the supply to the heater and should come of a terminal marked B5.
Will this part fit my appliance?
Check Now