Oven Timer Assembly Stock Number: ES470358
Genuine spare part for select models of Rangemaster cookers
Manufactured by Rangemaster
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Oven Timer Assembly
If your oven timer has malfunctioned, don't allow your faulty clock to hinder your cooking experience! This replacement cooker timer will fit to the front of your cooker, to make sure you're able to accurately time all those lovely dishes you prepare. This timer includes 6 buttons that you can use to control the timer unit.
Genuine spare part for select models of Rangemaster cookers.
Please check the model fit list to ensure compatibility with your appliance.
4 Questions and 6 Answers
- Did this today. Remove 4screws on lhs burner section, two on rh burner tray. Remove 4 screws at back to loosen the rear vent. Remove the rhs edge strip. Remove the screws on top and below securing the front panel, remove knobs and the front strip comes off. Remove the galv plate securing the clock in place. Take a pic and pull wires off .. Refit reverse of this .. Took around an hour.
- Turn off electricity also gas as precaution. Instructions included within how to use booklet. Need to remove both top burner sections. Four screws int left top tray. two in right hand section. Remove the four screwsthat secure top burner trays to oven flue grill from the back. These are difficult to find and need magnetic screw driver to hold screws when refitting. Righthand top burner section can now slide to the right approx 30mm. Remove the four screws that hold face panel both fro below (by oven doors) and four screws now accessable below top burner trays. The timer is located within galvanised steel plate secured by one screw. Disconnect electrical spade connectors noting colour / locations. Refit is reverse of this. Takes approx 30 - 45 minutes overall.
Can you tell me where the model number plate is located on the Rangemaster 110? I've looked on the back of the cooker and there is no plate, so where else is it!!
- If your model has the drawer below the right hand oven remove it and the plate is on the side wall of the cooker
- Take out the bottom drawer, and you should find the model number plate on the inside of the cooker, right hand side.
-
Chris at eSpares says...
See our video: How to replace a Oven timer http://www.espares.co.uk/advice/1/2146
i have a diplomat select 920 oven and hob, main oven willnot work, the control panel keeps flashing and not able to do anything. the oven will not come on, any ideas what might be wrong, i though it might be the control panel
-
Rory at eSpares says...
Hi there, this is an awkward one. If the control panel is flashing and the oven's not working, there's quite a few possible causes for it. It could be that the control panel's connections are damaged, and/or the oven element is gone.
Will this part fit my appliance?
Check Now
